Keine Weiterleitung obwohl der Port offen ist

Support für das easy2connect System
Post Reply
em2L
Posts: 3
Joined: Sun 19. Jun 2022, 12:33

Keine Weiterleitung obwohl der Port offen ist

Post by em2L »

Hallo,

ich habe gerade erfolgreich eine FIP-Box in Betrieb genommen.
Eine Weiterleitung von SSH oder RDP funkionieren gut.

Problem ist eine Client-Server Anwendung "RemAud" zur Übertragung eines Audio-Kanals mit TCP
Obwohl der Server-Port offen ist und das mit dem Port Test auf der Seite "FIP-Box easy2connect" bestätigt wird, werden Verbindungsanfragen vom Client auf den Server zurückgewiesen (Connection refused).

Mit WireShark auf Client-Seite sehe ich, dass die Daten abgewiesen werden. Auf der Server-Seite sehe ich nur den Port-Test. Die Verbindungsanfrage vom Client kommt nicht durch.


No. Time Source Destination Protocol Length Info
34 3.779326 192.168.0.2 185.248.148.42 TCP 66 59577 → 49151 [SYN] Seq=0 Win=64240 Len=0 MSS=1460 WS=256 SACK_PERM=1

Frame 34: 66 bytes on wire (528 bits), 66 bytes captured (528 bits) on interface \Device\NPF_{71A98775-0659-4F62-BBF1-BE08083CD65C}, id 0
Interface id: 0 (\Device\NPF_{71A98775-0659-4F62-BBF1-BE08083CD65C})
Encapsulation type: Ethernet (1)
Arrival Time: Jun 25, 2022 12:00:30.069084000 Mitteleuropäische Sommerzeit
[Time shift for this packet: 0.000000000 seconds]
Epoch Time: 1656151230.069084000 seconds
[Time delta from previous captured frame: 0.005803000 seconds]
[Time delta from previous displayed frame: 0.000000000 seconds]
[Time since reference or first frame: 3.779326000 seconds]
Frame Number: 34
Frame Length: 66 bytes (528 bits)
Capture Length: 66 bytes (528 bits)
[Frame is marked: False]
[Frame is ignored: False]
[Protocols in frame: eth:ethertype:ip:tcp]
[Coloring Rule Name: TCP SYN/FIN]
[Coloring Rule String: tcp.flags & 0x02 || tcp.flags.fin == 1]
Ethernet II, Src: ASUSTekC_76:ee:b1 (c8:60:00:76:ee:b1), Dst: Tp-LinkT_b4:9e:3a (f8:1a:67:b4:9e:3a)
Internet Protocol Version 4, Src: 192.168.0.2, Dst: 185.248.148.42
Transmission Control Protocol, Src Port: 59577, Dst Port: 49151, Seq: 0, Len: 0

No. Time Source Destination Protocol Length Info
35 3.801314 185.248.148.42 192.168.0.2 TCP 60 49151 → 59577 [RST, ACK] Seq=1 Ack=1 Win=0 Len=0

Frame 35: 60 bytes on wire (480 bits), 60 bytes captured (480 bits) on interface \Device\NPF_{71A98775-0659-4F62-BBF1-BE08083CD65C}, id 0
Interface id: 0 (\Device\NPF_{71A98775-0659-4F62-BBF1-BE08083CD65C})
Encapsulation type: Ethernet (1)
Arrival Time: Jun 25, 2022 12:00:30.091072000 Mitteleuropäische Sommerzeit
[Time shift for this packet: 0.000000000 seconds]
Epoch Time: 1656151230.091072000 seconds
[Time delta from previous captured frame: 0.021988000 seconds]
[Time delta from previous displayed frame: 0.021988000 seconds]
[Time since reference or first frame: 3.801314000 seconds]
Frame Number: 35
Frame Length: 60 bytes (480 bits)
Capture Length: 60 bytes (480 bits)
[Frame is marked: False]
[Frame is ignored: False]
[Protocols in frame: eth:ethertype:ip:tcp]
[Coloring Rule Name: TCP RST]
[Coloring Rule String: tcp.flags.reset eq 1]
Ethernet II, Src: Tp-LinkT_b4:9e:3a (f8:1a:67:b4:9e:3a), Dst: ASUSTekC_76:ee:b1 (c8:60:00:76:ee:b1)
Internet Protocol Version 4, Src: 185.248.148.42, Dst: 192.168.0.2
Transmission Control Protocol, Src Port: 49151, Dst Port: 59577, Seq: 1, Ack: 1, Len: 0

Danach kommen nur einige Retransmissions.

Was könnte die Ursache dafür sein?

Grüße, Martin
em2L
Posts: 3
Joined: Sun 19. Jun 2022, 12:33

Re: Keine Weiterleitung obwohl der Port offen ist

Post by em2L »

Nachtrag:

Das Problem lag in einer Portbeschränkung der Applikation und konnte durch ein anderes Mapping gelöst werden.

Danke an den hervorragenden Support von Feste-IP!
Post Reply